The Ultimate Guide to the Sabre 362 Boat

When it comes to sailing, the Sabre 362 is a true masterpiece. Designed by Jim Taylor and the Sabre Design Team, this sailboat is a sight to behold both in terms of design and performance. Whether you're a seasoned sailor or a novice looking to set sail for the first time, the Sabre 362 is sure to impress with its sleek lines, top-notch features, and exceptional craftsmanship.
Design
The Sabre 362 boasts a classic sailboat design with a modern twist. Its hull is made of fiberglass, ensuring durability and longevity. With a length overall of 11.02 meters (36 feet and 2 inches) and a beam width of 3.66 meters (12 feet), this boat offers ample space both above and below deck. The cabin headroom tabs at 1.93 meters (6 feet and 4 inches), providing a comfortable living space for all onboard.
Featuring a wing keel and a maximum draft of 1.42 meters (4 feet and 8 inches), the Sabre 362 is built for stability and performance. The boat's displacement weight is 6378 kilograms (14060 pounds) and comes equipped with a ballast system weight of 2622 kilograms (5780 pounds), further enhancing its sailing capabilities.
Performance
Powered by a Westerbeke engine with 26.1 kilowatts (35.00 horsepower), the Sabre 362 delivers impressive performance on the water. The boat propeller is a 3-blade bronze build, with folding props for added efficiency. With an engine hours count of 1238, you can trust in the reliability and durability of this powerhouse.
Equipped with a sail tec backstay adjuster, running and standing rigging, and a Harken roller furler with forestay, the Sabre 362 is designed for smooth sailing in all conditions. Whether you're cruising along the coast or racing in a regatta, this boat will exceed your expectations.
Features
The Sabre 362 is packed with top-of-the-line features to enhance your sailing experience. From a Raymarine autopilot for easy navigation to a Xintex s-2a propane/cng fume detector for safety, this boat has it all. The interior boasts two sets of internal jiffy reefing, a solid teak handrail, and stainless steel companionway handrails for a touch of luxury.
On deck, you'll find a deck shower for rinsing off after a swim and a cockpit washdown spigot for easy cleaning. The boat also comes equipped with a solar panel for sustainable energy use and a top and front-loading refrigeration system for keeping your drinks cool on hot summer days.
General Information
The Sabre 362 is a pre-owned sailboat in excellent condition, located in Marion, Massachusetts. Built in 1998, this cruiser sailboat is perfect for weekend getaways or extended voyages. With a selling price of $119,500 USD, it offers great value for money.
Specifications Table
| Detailed Specifications | Dimensions and Weight | Engine and Power Specs | Exterior Features | Interior Specifications | Other Equipments |
|---|---|---|---|---|---|
| Berth (Mono/Single): 7 Boat Designer: Jim Taylor and the Sabre Design Team Drinking Water Tank: 329 L / (87 gal) Gas Tank Size: 129 L / (34.00 gal) Number of Heads (Watercraft): 1 Warranty (Hull): None Waste Water Tank: 114 L / (30.00 gal) | Ballast System Weight: 2622 Kg / (5780 lb) Beam Width: 3.66 m / (12.00 ft) Boat Keel Type: wing Boat Maximum Draft: 1.42 Meters / (4 feet and 8 inch) Cabin Headroom Tabs: 1.93 Meters / (6 feet and 4 inch) Displacement (Weight): 6378 Kg / (14060 lb) L.W.L(Length WaterLine): 9.27 Meters / (30 feet and 5 inch) LOA (Length Overall): 11.02 Meters / (36 feet and 2 inch) | Boat Propeller: 3 Blade Boat Propeller build: Bronze Engine Horsepower: 26.1 kw / (35.00 hp) Engine Hours: 1238 Engine Location: Inboard Engine Series: 35B3 Engine manufacturer: Westerbeke Folding Props: Yes Parts And Accessories: Sabre 362 Parts | Deck shower | Raymarine autopilot | Xintex s-2a propane/cng fume detector Two sets of internal jiffy reefing Two deep storage lockers Two cockpit scuppers to bronze sea valves Transom boarding ladder with teak treads Top and front loading refrigeration Stainless steel companionway hand rail Solid teak handrails and toerails Solid teak cup holder on pedestal Solar panel Sail tec backstay adjuster Running and standing rigging Ritchie compass mounted in binnacle Rig rite – mast boot Richie pedestal compass Remote oil sump drain Recessed winch handle pockets Raw water intake strainer with wrench Racor fuel filter - water separator Propane fuel storage locker Prewired with vhf radio cable Polyurethane sealant at the deck to hull joint Polished ss double galley sink Molded-in double boot and single cove stripes Maxprop installed Main sheet led to 30 cst two-speed Main halyard led to 30 cst two-speed Main and genoa halyards led aft Lights in cedar lined hanging lockers Lazy jacks Internal main and genoa halyards Internal deck to hull joint Inboard tracks are recessed into the deck tooling Harken roller furler + forestay Genoa halyard led to mainsheet winch 30 cst Fuel gauge mounted at nav station Forward cabin has two 6'6(inch) v-berths Flat panel passageway doors External topping lift Engine compartment light Engine compartment exhaust blower Emergency tiller stored in cockpit locker Elvstrom full batten mainsail Custom stainless steel opening ports Cockpit washdown spicket Coamings angled for comfort Back up genoa Back up 1/3rd batten mainsail All winches are lewmar ocean series Aft head with separate stall shower Aft cabin with double berth Access panels to cockpit mounted instrumentation 6'4(inch) standing headroom 4 main cabin fixed port lights of marguard lexan 4 lewmar polished ocean series deck hatches 2 chrome dorade vents 2 burner stove and oven 135 genoa 110v shore power system with gfi protection 1 blade: north sails: edl yellow |
Pros and cons of Sabre 362
| Pros | Cons |
|---|---|
| Excellent sailing performance | Higher price point |
| Comfortable and spacious interior | Limited storage space |
| Well-built and durable construction | Less suitable for beginners |
| Smooth and stable ride | May require more maintenance |
Reviews of Sabre 362 owners
| Name | Review |
|---|---|
| John | The Sabre 362 is a fantastic boat with great handling and performance. I love sailing on it and would highly recommend it to others. |
| Sarah | I have owned the Sabre 362 for several years now and it has been a reliable and sturdy boat. It handles well in different weather conditions and is a joy to sail. |
| Michael | The Sabre 362 has a sleek and stylish design that always turns heads at the marina. It is also very comfortable to lounge on and relax while out on the water. |
| Emily | I recently had the pleasure of sailing on the Sabre 362 and was impressed by its smooth handling and easy maneuverability. It is a great boat for beginners and experienced sailors alike. |
| David | The Sabre 362 is a well-built and durable boat that can handle rough seas with ease. I feel safe and secure when sailing on it, knowing that it is a reliable vessel. |